2013 Nissan Altima Lug Nut Torque Specifications
When it comes to maintaining your vehicle, one important aspect to consider is the proper torque specifications for your lug nuts. This ensures that your wheels are securely fastened and reduces the risk of accidents or damage to your vehicle. In this article, we will provide you with the recommended lug nut torque specifications for the 2013 Nissan Altima.
Torque Specifications Table:
| Lug Nut Size | Torque Specifications (lb. ft) | Torque Specifications (Nm) |
|---|---|---|
| 14mm x 1.50 | 80-100 | 108-135 |
| 12mm x 1.25 | 70-80 | 95-108 |
| 12mm x 1.50 | 70-80 | 95-108 |
Steps to Properly Torque Lug Nuts:
- Start by ensuring that your vehicle is parked on a level surface and the parking brake is engaged.
- Locate the lug nuts on each wheel of your 2013 Nissan Altima.
- Using a lug wrench or a torque wrench, loosen each lug nut by turning them counterclockwise.
- Once all the lug nuts are loosened, use a jack to lift the vehicle off the ground. Place jack stands under the vehicle for added safety.
- Remove the lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to ensure proper contact and prevent any debris from interfering with the lug nut torque.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a star pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts to the specified torque specifications mentioned in the table above. Start with a lower torque setting and gradually increase it until you reach the recommended torque.
- Once all the lug nuts are properly torqued, lower the vehicle back to the ground using the jack.
- Finally, using a torque wrench, recheck the lug nut torque to ensure they are tightened to the correct specifications.
It is important to note that over-tightening or under-tightening lug nuts can lead to wheel damage or even accidents. Therefore, always refer to the manufacturer’s recommended torque specifications for your specific vehicle model, such as the 2013 Nissan Altima, to ensure proper wheel installation and safety.
By following these torque specifications and steps, you can ensure that your 2013 Nissan Altima’s lug nuts are properly tightened, providing you with a safe and smooth driving experience.
