2016 GMC Terrain Lug Nut Torque Specifications
Introduction
When it comes to maintaining your vehicle, one important aspect to consider is the torque specifications for lug nuts. Properly torquing your GMC Terrain’s lug nuts ensures the safety and integrity of your wheels. In this article, we will provide you with the recommended lug nut torque specifications for the 2016 GMC Terrain.
Lug Nut Torque Specifications
To ensure accurate and consistent torque values, it is essential to use a reliable torque wrench. The following table provides the lug nut torque specifications for the 2016 GMC Terrain:
| Lug Nut Size | Torque Specifications (lb. ft/Nm) |
|---|---|
| 14mm x 1.5 | 100 lb. ft / 135 Nm |
| 12mm x 1.5 | 100 lb. ft / 135 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are torqued correctly, follow these steps:
1. Gather the necessary tools: torque wrench, lug nut socket, and extension (if required).
2. Loosen the lug nuts using a lug nut wrench or a breaker bar before lifting the vehicle.
3. Lift the vehicle using a jack and secure it on jack stands.
4. Remove the lug nuts and take off the wheel.
5. Clean the wheel hub and the mounting surface to remove any dirt or debris.
6. Place the wheel back onto the hub and hand-tighten the lug nuts.
7. Use a torque wrench to tighten the lug nuts in a star pattern. This ensures even distribution of torque.
8. Set the torque wrench to the specified torque value according to the lug nut size.
9. Begin torquing the lug nuts in the star pattern, gradually increasing the torque until reaching the specified value.
10. Double-check each lug nut to ensure they are all torqued correctly.
11. Lower the vehicle and use a torque wrench to recheck the lug nut torque after a short drive.
Conclusion
Properly torquing the lug nuts on your 2016 GMC Terrain is crucial for your safety and the longevity of your vehicle’s wheels. By following the recommended torque specifications and using a reliable torque wrench, you can ensure that your lug nuts are tightened to the appropriate level. Remember to always recheck the torque after a short drive to ensure they remain properly torqued.
