2016 Kia Sorento Lug Nut Torque Specifications
Introduction
The lug nut torque specification is an essential factor to consider when it comes to maintaining the safety and performance of your vehicle. In this article, we will provide you with the recommended lug nut torque specifications for the 2016 Kia Sorento.
Lug Nut Torque Specs
To ensure proper tightening of the lug nuts on your 2016 Kia Sorento, it is crucial to adhere to the manufacturer’s recommended torque specifications. Below is a table that outlines the lug nut torque specs in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut Size | Torque Specifications (lb. ft) | Torque Specifications (Nm) |
|---|---|---|
| 14mm x 1.5 | 85-95 lb. ft | 115-129 Nm |
| 12mm x 1.5 | 70-80 lb. ft | 95-109 Nm |
| 12mm x 1.25 | 70-80 lb. ft | 95-109 Nm |
Proper Lug Nut Torque Procedure
To ensure the lug nuts are properly tightened, follow these steps:
- Start by using a lug wrench or a torque wrench to loosen the lug nuts on each wheel.
- Once the lug nuts are loose, use a jack to lift the vehicle off the ground and secure it with jack stands.
- Remove the lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to remove any dirt or debris.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a star pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts according to the specified torque value for your particular lug nut size.
- Repeat this process for each wheel.
- After tightening all the lug nuts, lower the vehicle back to the ground and use the torque wrench to recheck the lug nut torque to ensure they are properly tightened.
Conclusion
Maintaining the correct lug nut torque is crucial for the safety and performance of your 2016 Kia Sorento. By following the recommended torque specifications and using the proper torque procedure, you can ensure that your lug nuts are tightened to the appropriate level, reducing the risk of wheel detachment and ensuring a safe driving experience.
