2017 Subaru Outback Lug Nut Torque: A Comprehensive Guide
Introduction
When it comes to maintaining your vehicle, one of the most crucial aspects is ensuring that your lug nuts are properly torqued. This is especially important for the 2017 Subaru Outback, a reliable and versatile SUV that requires specific torque specifications for its lug nuts. In this article, we will provide you with all the necessary information about the lug nut torque for your 2017 Subaru Outback.
Lug Nut Torque Specifications
To ensure the safety and longevity of your vehicle, it is essential to tighten the lug nuts on your Subaru Outback to the correct torque specification. Below is a table that outlines the recommended torque values in both pound-feet (lb. ft) and Newton meters (Nm) for the lug nuts on your 2017 Subaru Outback:
| Lug Nut Position | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| Front and Rear | 88-108 | 120-147 |
Steps to Properly Torque Lug Nuts
Now that you have the torque specifications for your Subaru Outback’s lug nuts, it is important to know how to properly apply the torque. Follow these steps to ensure a correct and secure lug nut installation:
1. Gather the necessary tools: You will need a torque wrench, a socket that fits your lug nuts, and a breaker bar.
2. Loosen the lug nuts: Before lifting your vehicle, use the breaker bar to loosen the lug nuts slightly. This will make it easier to remove them once the vehicle is lifted.
3. Lift the vehicle: Use a jack to lift your Subaru Outback off the ground, ensuring that it is secure and stable.
4. Remove the lug nuts: Completely remove the lug nuts and set them aside in a safe place.
5. Clean the wheel studs: Take a moment to clean the wheel studs using a wire brush or a cloth to remove any dirt or debris.
6. Install the wheel: Carefully align the wheel with the wheel studs and slide it onto the hub.
7. Hand-tighten the lug nuts: Start threading the lug nuts onto the wheel studs by hand, ensuring they are properly aligned.
8. Torque the lug nuts: Using the torque wrench and the appropriate socket, tighten each lug nut to the specified torque value in a star or crisscross pattern. This ensures even distribution of torque and prevents warping of the brake rotor.
9. Double-check the torque: Once all lug nuts are torqued, go back and double-check each one to ensure they are tightened correctly.
10. Lower the vehicle: Carefully lower your Subaru Outback back to the ground using the jack.
11. Final tightening: After the vehicle is on the ground, give each lug nut a final check to ensure they are still properly torqued.
Conclusion
Properly torquing the lug nuts on your 2017 Subaru Outback is crucial for the safety and performance of your vehicle. By following the recommended torque specifications and the step-by-step process outlined in this article, you can ensure that your lug nuts are tightened correctly. Regularly checking and maintaining the torque of your lug nuts will contribute to the overall longevity and reliability of your Subaru Outback.
