2018 Jeep Compass Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. The lug nuts secure the wheels to the vehicle’s hub, and if they are not tightened correctly, it can lead to various issues, including wheel wobbling, vibrations, and even the possibility of the wheel detaching while driving. In this article, we will discuss the lug nut torque specifications for the 2018 Jeep Compass, providing you with the necessary information to keep your wheels securely fastened.
Lug Nut Torque Specifications
To ensure the lug nuts are tightened to the appropriate torque, it is essential to refer to the manufacturer’s specifications. For the 2018 Jeep Compass, the lug nut torque specifications are as follows:
| Lug Nut Size | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| 14mm x 1.50 | 85-105 | 115-142 |
| 12mm x 1.50 | 70-80 | 95-110 |
| 1/2″ x 20 | 75-85 | 100-115 |
Steps to Properly Torque Lug Nuts
To ensure that the lug nuts are tightened correctly, follow these steps:
- Start by parking your Jeep Compass on a flat and level surface. Engage the parking brake for added safety.
- Using a lug wrench or a suitable socket and torque wrench, loosen the lug nuts on the wheel you intend to work on. Loosen them in a crisscross pattern to prevent any damage to the wheel or studs.
- Once the lug nuts are loosened, lift the vehicle using a jack and secure it with jack stands. Make sure to follow proper lifting and support procedures as outlined in your vehicle’s manual.
- Remove the lug nuts and take off the wheel.
- Clean the wheel studs and the mounting surface to remove any dirt or debris that may interfere with proper tightening.
- Place the wheel back onto the hub, aligning the lug nut holes with the studs.
- Hand-tighten the lug nuts in a crisscross pattern to ensure even seating.
- Using a torque wrench, tighten the lug nuts to the specified torque value according to the table provided above. Start with a lower torque setting and gradually increase it until the desired torque is reached.
- After torquing the lug nuts, double-check their tightness to ensure they are properly secured.
- Repeat the process for each wheel, following the same steps.
Conclusion
Properly torquing the lug nuts on your 2018 Jeep Compass is crucial for the safety and performance of your vehicle. By adhering to the manufacturer’s specifications and following the correct torque procedure, you can ensure that your wheels are securely fastened. Regularly checking the lug nut torque is recommended, especially after tire rotations or any maintenance involving the wheels. Remember, safety should always be a top priority when working on your vehicle.
