2020 WRX Lug Nut Torque: Proper Torque Specifications for Your Vehicle
Introduction
When it comes to maintaining your 2020 Subaru WRX, one crucial aspect is ensuring that your lug nuts are properly torqued. This not only ensures the safety of your vehicle but also prevents damage to the wheels and other components. In this article, we will discuss the recommended lug nut torque specifications for the 2020 WRX, providing you with the necessary information to keep your vehicle in top condition.
Why is Lug Nut Torque Important?
Properly torquing your lug nuts is essential for several reasons. Firstly, it ensures that the wheels are securely fastened to the vehicle, reducing the risk of them coming loose while driving. Secondly, it helps distribute the load evenly across the wheel studs, preventing excessive stress on individual components. Lastly, correct lug nut torque helps maintain the integrity of the wheel and prevents damage to the wheel studs or threads.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your 2020 WRX lug nuts, it is important to refer to the manufacturer’s specifications. Below is a table outlining the recommended torque values for the lug nuts of the 2020 Subaru WRX:
| Lug Nut Type | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| Steel Wheels | 89-108 lb. ft | 120-147 Nm |
| Alloy Wheels | 72-87 lb. ft | 98-118 Nm |
Steps to Properly Torque Lug Nuts
To ensure that your lug nuts are properly torqued, follow these steps:
1. Start by gathering the necessary tools, including a torque wrench and the appropriate socket size for your lug nuts.
2. Loosen each lug nut on the wheel using a lug wrench or a breaker bar, but do not remove them completely.
3. Once all the lug nuts are loosened, raise the vehicle using a jack and secure it with jack stands.
4. Remove the lug nuts and the wheel from the vehicle.
5. Clean the wheel studs and the mounting surface to remove any dirt or debris.
6. Place the wheel back onto the vehicle, aligning the wheel studs with the corresponding holes.
7. Hand-tighten each lug nut until they are snug.
8. Using a torque wrench, tighten the lug nuts in a crisscross pattern to the recommended torque specification.
9. Repeat the process for each wheel.
10. Lower the vehicle and use the torque wrench to recheck the lug nut torque after a short drive to ensure they are still properly tightened.
Conclusion
Properly torquing the lug nuts on your 2020 Subaru WRX is crucial for the safety and longevity of your vehicle. By following the manufacturer’s recommended torque specifications and using the correct tools, you can ensure that your wheels are securely fastened and prevent any potential issues. Remember to periodically check the lug nut torque to maintain the integrity of your vehicle’s wheels and enjoy a safe driving experience.
