2010 Subaru Forester Lug Nut Torque Specifications
Introduction
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. This is especially important for the safety and performance of your Subaru Forester. In this article, we will provide you with the recommended lug nut torque specifications for a 2010 Subaru Forester.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your Subaru Forester’s lug nuts, refer to the table below for the recommended torque specifications in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut Size | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| 12mm x 1.25 | 70-80 lb. ft | 95-108 Nm |
| 12mm x 1.5 | 70-80 lb. ft | 95-108 Nm |
| 14mm x 1.25 | 85-95 lb. ft | 115-129 Nm |
| 14mm x 1.5 | 85-95 lb. ft | 115-129 Nm |
Steps to Properly Torque Lug Nuts
To ensure that your lug nuts are properly torqued, follow these steps:
- Start by parking your Subaru Forester on a level surface and engaging the parking brake.
- Using a lug wrench or a torque wrench, loosen each lug nut by turning them counterclockwise. Do not remove them completely at this stage.
- Once all the lug nuts are loosened, raise your vehicle using a jack and securely support it with jack stands.
- Now, remove the loosened lug nuts and take off the wheel.
- Clean the wheel studs and the mounting surface to ensure a proper connection.
- Place the wheel back onto the wheel studs and hand-tighten the lug nuts in a star or crisscross pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts according to the specifications mentioned in the table above. Start with a lower torque value and gradually increase it until you reach the recommended torque.
- Once all the lug nuts are torqued, lower your vehicle and remove the jack stands.
- Finally, using the torque wrench, double-check the lug nuts to ensure they are properly tightened.
Conclusion
Properly torquing the lug nuts on your 2010 Subaru Forester is essential for your safety and the longevity of your vehicle. By following the recommended torque specifications and the steps outlined in this article, you can ensure that your wheels are securely fastened. Remember to always refer to your vehicle’s owner’s manual for specific instructions and consult a professional if you are unsure or uncomfortable performing this task yourself.
