2016 Subaru Forester Lug Nut Torque
Introduction
The lug nut torque is an essential aspect of maintaining the safety and performance of your vehicle. Properly torquing the lug nuts on your 2016 Subaru Forester ensures that the wheels are securely fastened to the vehicle, preventing accidents and potential damage. This article will guide you through the recommended lug nut torque specifications for your Subaru Forester.
Lug Nut Torque Specifications
To ensure the correct torque is applied to the lug nuts, it is important to consult the manufacturer’s specifications. Here are the recommended torque values for the lug nuts on a 2016 Subaru Forester:
| Lug Nut Size | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| 12mm x 1.25 | 70-80 | 95-108 |
| 12mm x 1.5 | 70-80 | 95-108 |
| 14mm x 1.25 | 85-95 | 115-129 |
| 14mm x 1.5 | 85-95 | 115-129 |
Steps to Torque Lug Nuts
To properly torque the lug nuts on your 2016 Subaru Forester, follow these steps:
- Ensure the vehicle is parked on a level surface and engage the parking brake.
- Locate the lug wrench and the torque wrench.
- Loosen each lug nut by turning them counterclockwise using the lug wrench. Do not remove them completely at this stage.
- Once all the lug nuts are loosened, use the jack to lift the vehicle off the ground. Refer to your vehicle’s owner’s manual for the correct jacking points.
- Remove the lug nuts and the wheel.
- Clean the wheel hub and the mounting surface to ensure proper contact.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a crisscross pattern to ensure even tightening.
- Using the torque wrench, tighten the lug nuts to the specified torque value according to the table provided above.
- Repeat the process for each wheel.
- Lower the vehicle to the ground and use the torque wrench to recheck the lug nut torque after a short drive.
Conclusion
Properly torquing the lug nuts on your 2016 Subaru Forester is crucial for the safety and performance of your vehicle. By following the recommended torque specifications and using the correct torque wrench, you can ensure that your wheels are securely fastened. Regularly checking and maintaining the lug nut torque will help prevent accidents and keep your Subaru Forester in optimal condition.
