Dodge Durango Lug Nut Torque: Ensuring Proper Wheel Fastening
Introduction
When it comes to maintaining your Dodge Durango’s wheels, one crucial aspect to consider is the lug nut torque. Properly torquing the lug nuts ensures that the wheels are securely fastened to the vehicle, preventing any accidents or wheel-related issues. In this article, we will discuss the recommended lug nut torque specifications for the Dodge Durango, providing you with the necessary information to keep your wheels safe and secure.
Understanding Lug Nut Torque
Lug nut torque refers to the amount of force applied to tighten the lug nuts on a vehicle’s wheels. It is essential to tighten the lug nuts to the manufacturer’s specifications to ensure proper wheel fastening. Insufficient torque can lead to loose wheels, while excessive torque can damage the wheel studs or cause them to break.
Lug Nut Torque Specifications for Dodge Durango
To help you maintain the correct lug nut torque on your Dodge Durango, refer to the table below for the recommended torque specifications in both pound-feet (lb. ft) and Newton meters (Nm):
| Wheel Size | Lug Nut Torque (lb. ft) | Lug Nut Torque (Nm) |
|---|---|---|
| 17-inch | 110-130 | 149-176 |
| 18-inch | 100-120 | 136-163 |
| 20-inch | 100-120 | 136-163 |
Proper Lug Nut Torquing Procedure
To ensure the lug nuts are torqued correctly, follow these steps:
- Start by properly securing the vehicle. Park on a level surface and engage the parking brake.
- Loosen the lug nuts using a lug wrench or a suitable tool before lifting the vehicle.
- Use a jack to lift the vehicle, ensuring it is stable and secure on jack stands.
- Remove the lug nuts and the wheel.
- Clean the wheel hub and the mounting surface to remove any dirt or debris.
- Place the wheel onto the hub, aligning the lug nut holes.
- Hand-tighten the lug nuts in a star or crisscross pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts to the specified torque in the table above.
- Double-check the lug nuts to ensure they are all properly torqued.
- Lower the vehicle and remove the jack stands.
- Finally, recheck the lug nuts after driving a short distance to confirm they remain properly torqued.
Conclusion
Maintaining the correct lug nut torque on your Dodge Durango is crucial for the safety and performance of your vehicle. By following the recommended torque specifications and using the proper torquing procedure, you can ensure that your wheels are securely fastened. Remember to always consult your vehicle’s manual or contact a professional if you have any doubts or concerns regarding lug nut torque or wheel maintenance.
