2020 Ford Explorer Lug Nut Torque Spec
Introduction
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are tightened to the correct torque specification. This not only ensures the safety of your vehicle but also prevents any damage to the wheel studs or the wheel itself. In this article, we will discuss the lug nut torque specification for the 2020 Ford Explorer.
Lug Nut Torque Specs
To properly tighten the lug nuts on your 2020 Ford Explorer, it is essential to follow the manufacturer’s recommended torque specification. The table below provides the torque specifications for the lug nuts in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| Front/Rear Wheel Lug Nuts | 150 lb. ft | 203 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are tightened correctly, follow these steps:
- Using a lug wrench or a torque wrench, loosen the lug nuts on the wheel you want to work on. Loosen them in a cross pattern to prevent any damage to the wheel studs.
- Once the lug nuts are loosened, raise the vehicle using a jack and secure it with jack stands. Make sure the vehicle is stable and secure before proceeding.
- Remove the lug nuts and the wheel from the vehicle.
- Clean the wheel hub and the mounting surface to remove any dirt or debris.
- Place the wheel back onto the wheel hub, aligning the holes with the wheel studs.
- Hand-tighten the lug nuts onto the wheel studs to ensure they are properly seated.
- Using a torque wrench, tighten the lug nuts in a star or cross pattern. Gradually increase the torque until you reach the specified torque specification.
- Double-check the torque on each lug nut to ensure they are all tightened to the correct specification.
- Lower the vehicle from the jack stands and remove the jack.
- Finally, recheck the lug nuts after driving a short distance to ensure they have not loosened.
Conclusion
Properly torquing the lug nuts on your 2020 Ford Explorer is crucial for the safety and longevity of your vehicle. By following the manufacturer’s recommended torque specification and using the correct tightening sequence, you can ensure that your wheels are securely fastened. Remember to always double-check your work and periodically inspect the lug nuts to ensure they remain properly torqued.
