2013 Honda Pilot Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. The lug nuts hold the wheels securely in place, preventing them from coming loose while driving. In this article, we will discuss the lug nut torque specifications for a 2013 Honda Pilot, providing you with the necessary information to keep your wheels safe and secure.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your Honda Pilot’s lug nuts, it is essential to follow the manufacturer’s recommended specifications. The table below outlines the lug nut torque specifications in both pound-feet (lb. ft) and Newton-meters (Nm) for the 2013 Honda Pilot:
| Lug Nut Size | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| 14mm x 1.5 | 80 lb. ft | 108 Nm |
| 12mm x 1.5 | 80 lb. ft | 108 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are tightened correctly, follow these steps:
- Using a lug wrench or a torque wrench, loosen each lug nut by turning them counterclockwise.
- Once all the lug nuts are loosened, use a jack to lift the vehicle off the ground, ensuring it is securely supported by jack stands.
- Remove the lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to remove any dirt or debris.
- Place the wheel back onto the hub, aligning the holes with the lug studs.
- Hand-tighten each lug nut until they are snug.
- Using a torque wrench, tighten the lug nuts in a star pattern, gradually increasing the torque to the specified value.
- Double-check each lug nut to ensure they are tightened to the correct torque specification.
- Lower the vehicle back to the ground and remove the jack stands.
- Finally, using a torque wrench, recheck the lug nuts’ torque after driving approximately 50 miles to ensure they have not loosened.
Conclusion
Properly torquing the lug nuts on your 2013 Honda Pilot is crucial for your safety and the longevity of your vehicle. By following the manufacturer’s recommended torque specifications and using the correct tools, you can ensure that your wheels are securely fastened. Regularly checking the lug nut torque and re-torquing them when necessary will help prevent accidents and maintain the overall performance of your Honda Pilot.
