2019 Subaru Ascent Lug Nut Torque: Proper Torque Specifications for Safety and Performance
When it comes to maintaining your vehicle’s safety and performance, paying attention to even the smallest details is crucial. One such detail that often goes unnoticed but plays a significant role in ensuring your Subaru Ascent’s wheels are securely fastened is the lug nut torque. Properly torquing the lug nuts not only prevents wheel detachment but also helps maintain the longevity of your vehicle’s components. In this article, we will discuss the recommended lug nut torque specifications for the 2019 Subaru Ascent.
Understanding Lug Nut Torque
Lug nut torque refers to the amount of force applied to tighten the lug nuts on your vehicle’s wheels. It is measured in pound-feet (lb. ft) or Newton-meters (Nm). Applying the correct torque ensures that the lug nuts are tightened to the manufacturer’s specifications, preventing them from loosening over time due to vibrations and other factors.
Recommended Lug Nut Torque Specifications for the 2019 Subaru Ascent
It is essential to follow the manufacturer’s recommendations for lug nut torque to maintain the safety and performance of your Subaru Ascent. The table below provides the lug nut torque specifications for the 2019 Subaru Ascent:
| Lug Nut Size | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| 12mm x 1.25 | 70-80 lb. ft | 95-108 Nm |
| 14mm x 1.5 | 85-95 lb. ft | 115-129 Nm |
Proper Lug Nut Torquing Procedure
Now that you know the recommended torque specifications for your Subaru Ascent’s lug nuts, it’s essential to follow the proper torquing procedure to ensure accurate and consistent results. Here’s a step-by-step guide:
- Start by ensuring your vehicle is on a level surface and the parking brake is engaged.
- Using a lug wrench or a torque wrench, loosen the lug nuts on each wheel before lifting the vehicle.
- Use a jack to lift the vehicle off the ground, following the instructions provided in your owner’s manual.
- Once the wheel is off the ground, remove the loosened lug nuts and the wheel.
- Clean the wheel hub and the mounting surface to ensure a proper fit.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a star pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts according to the recommended torque specifications mentioned in the table above.
- After torquing, double-check each lug nut to ensure they are properly tightened.
- Repeat the process for each wheel.
- Lower the vehicle and recheck the lug nuts’ torque after a short drive to confirm they have not loosened.
By following these steps and adhering to the recommended lug nut torque specifications, you can ensure the safety and performance of your 2019 Subaru Ascent. Regularly checking and maintaining proper lug nut torque should be a part of your routine vehicle maintenance to prevent any potential issues and keep your Subaru running smoothly.
Remember, if you are unsure or uncomfortable performing this task yourself, it is always recommended to consult a professional mechanic or refer to your vehicle’s owner’s manual for guidance.
