2013 Dodge Dart Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one important aspect to consider is the proper torque specifications for lug nuts. This article will provide you with the necessary information regarding the lug nut torque for a 2013 Dodge Dart.
Lug Nut Torque Specifications
To ensure the safety and integrity of your vehicle’s wheels, it is crucial to tighten the lug nuts to the manufacturer’s recommended torque specifications. The following table provides the lug nut torque specs for the 2013 Dodge Dart:
| Lug Nut Size | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| 12mm x 1.25 | 70-80 lb. ft | 95-108 Nm |
| 12mm x 1.5 | 70-80 lb. ft | 95-108 Nm |
| 14mm x 1.5 | 85-95 lb. ft | 115-129 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are tightened correctly, follow these steps:
1. Start by gathering the necessary tools, including a torque wrench and the appropriate socket size for your lug nuts.
2. Loosen the lug nuts on the wheel you are working on, but do not remove them completely.
3. Jack up the vehicle and secure it with jack stands, ensuring your safety.
4. Remove the loosened lug nuts and take off the wheel.
5. Clean the wheel studs and the mounting surface to remove any dirt or debris.
6. Place the wheel back onto the wheel studs, aligning the holes with the studs.
7. Hand-tighten the lug nuts in a star pattern to ensure even pressure distribution.
8. Use a torque wrench to tighten the lug nuts to the specified torque value according to the table above.
9. Start with a lower torque setting and gradually increase it until you reach the recommended torque.
10. Repeat the torque process for each lug nut, following the star pattern.
11. Lower the vehicle from the jack stands and remove the jack.
12. Double-check the lug nuts to ensure they are properly tightened.
Conclusion
Properly torquing the lug nuts on your 2013 Dodge Dart is essential for maintaining the safety and performance of your vehicle. By following the manufacturer’s recommended torque specifications and using the correct tools, you can ensure that your wheels are securely fastened. Remember to always consult your vehicle’s owner’s manual for specific torque values and instructions.
