2017 Nissan Altima Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. The lug nuts play a vital role in keeping your wheels securely attached to your 2017 Nissan Altima. In this article, we will discuss the recommended lug nut torque specifications for the 2017 Nissan Altima, providing you with the necessary information to keep your wheels safe and secure.
Lug Nut Torque Specifications
To ensure the proper torque is applied to your Nissan Altima’s lug nuts, it is important to refer to the manufacturer’s specifications. The table below outlines the recommended torque values in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut Position | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| Front and Rear Wheel Lug Nuts | 80-100 lb. ft | 108-136 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts on your 2017 Nissan Altima are properly torqued, follow these steps:
1. Gather the necessary tools: You will need a torque wrench, a socket that fits your lug nuts, and a breaker bar if necessary.
2. Loosen the lug nuts: Before lifting your vehicle, use the breaker bar or a lug wrench to slightly loosen the lug nuts. This will make it easier to remove them once the vehicle is lifted.
3. Lift the vehicle: Use a jack to lift your Nissan Altima off the ground, ensuring it is securely supported by jack stands.
4. Remove the lug nuts: Completely remove the lug nuts and set them aside.
5. Clean the wheel studs: Take a moment to clean the wheel studs and ensure there is no debris or rust that could affect the torque readings.
6. Install the wheel: Carefully align the wheel with the wheel studs and slide it onto the hub.
7. Hand-tighten the lug nuts: Start threading the lug nuts onto the wheel studs by hand until they are snug.
8. Torque the lug nuts: Using a torque wrench, tighten the lug nuts in a star pattern. Apply the recommended torque specification (80-100 lb. ft or 108-136 Nm) to each lug nut.
9. Double-check the torque: After torquing all the lug nuts, go back and double-check each one to ensure they are all properly tightened.
10. Lower the vehicle: Carefully lower your Nissan Altima back to the ground.
11. Final check: Once the vehicle is on the ground, give each lug nut a final check to ensure they are still properly torqued.
Conclusion
Properly torquing the lug nuts on your 2017 Nissan Altima is essential for the safety and integrity of your wheels. By following the manufacturer’s recommended torque specifications and using the correct torque wrench, you can ensure that your lug nuts are tightened to the appropriate level. Regularly checking and maintaining the lug nut torque will help prevent wheel-related issues and keep you safe on the road.
