2013 Honda CRV Lug Nut Torque: Ensuring Proper Wheel Fastening
Introduction
When it comes to maintaining your vehicle’s safety and performance, proper wheel fastening is of utmost importance. The lug nuts that secure your wheels to the hub need to be tightened to the correct torque specifications to ensure a secure fit. In this article, we will explore the recommended lug nut torque for the 2013 Honda CRV and provide you with a handy table for easy reference.
Lug Nut Torque Specifications
To prevent over-tightening or under-tightening of lug nuts, it is crucial to follow the manufacturer’s recommended torque specifications. The 2013 Honda CRV requires a specific torque value for its lug nuts to ensure the wheels are securely fastened. Below is a table that lists the lug nut torque specifications for the 2013 Honda CRV in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut Torque | Pound-Feet (lb. ft) | Newton Meters (Nm) |
|---|---|---|
| Steel Wheels | 80 lb. ft | 108 Nm |
| Alloy Wheels | 80 lb. ft | 108 Nm |
Proper Lug Nut Torquing Procedure
To ensure the lug nuts are tightened correctly, follow these steps:
- Start by parking your Honda CRV on a flat surface and engaging the parking brake.
- Using a lug wrench or a torque wrench, loosen the lug nuts on the wheel you intend to remove. Do not remove them completely at this stage.
- Place a jack under the vehicle’s designated jacking point and lift the wheel off the ground.
- Remove the loosened lug nuts and the wheel.
- Clean the wheel hub and the mounting surface to remove any dirt or debris.
- Place the new or repaired wheel onto the hub, aligning the holes with the lug studs.
- Hand-tighten the lug nuts until they are snug.
- Using a torque wrench, tighten the lug nuts in a star pattern to the specified torque value mentioned in the table above.
- Double-check the lug nuts to ensure they are all properly torqued.
- Lower the vehicle back to the ground and remove the jack.
- Finally, recheck the lug nuts after driving a short distance to confirm they are still properly tightened.
Conclusion
Maintaining the correct lug nut torque on your 2013 Honda CRV is essential for your safety and the longevity of your vehicle. By following the manufacturer’s recommended torque specifications and using the proper torquing procedure, you can ensure that your wheels are securely fastened. Remember to periodically check the lug nut torque to maintain the integrity of your vehicle’s wheel fastening system.
