2016 Kia Soul Lug Nut Torque
Introduction
The lug nut torque specification is an important factor to consider when working on your 2016 Kia Soul. Properly torquing the lug nuts ensures the wheels are securely fastened to the vehicle, promoting safety and preventing any potential issues. In this article, we will provide you with the recommended lug nut torque specifications for the 2016 Kia Soul.
Lug Nut Torque Specs
To ensure the correct torque is applied to the lug nuts, it is essential to refer to the manufacturer’s specifications. Here is a table outlining the lug nut torque specs for the 2016 Kia Soul:
| Lug Nut Size | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| 12mm x 1.5 | 81-97 | 110-132 |
| 14mm x 1.5 | 85-105 | 115-142 |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are torqued correctly, follow these steps:
1. Start by parking your Kia Soul on a flat surface and engaging the parking brake.
2. Locate the lug wrench and the torque wrench in your vehicle’s toolkit.
3. Loosen each lug nut by turning them counterclockwise, but do not remove them completely at this stage.
4. Once all the lug nuts are loosened, use a jack to lift the vehicle off the ground, ensuring it is secure and stable.
5. Remove the lug nuts and take off the wheel.
6. Clean the wheel hub and the mounting surface to remove any dirt or debris.
7. Place the wheel back onto the hub, aligning the holes with the lug studs.
8. Hand-tighten the lug nuts in a star pattern to ensure even tightening.
9. Use a torque wrench to tighten the lug nuts to the recommended torque specification according to the table provided above.
10. Start with the first lug nut and gradually work your way around the wheel, tightening each lug nut to the specified torque.
11. Once all lug nuts are torqued, double-check the torque on each nut to ensure they are all properly tightened.
12. Lower the vehicle back to the ground using the jack.
13. Finally, use the torque wrench to recheck the lug nut torque after driving a short distance to ensure they have not loosened.
Conclusion
Properly torquing the lug nuts on your 2016 Kia Soul is crucial for your safety and the longevity of your vehicle. By following the manufacturer’s recommended torque specifications and using the correct tools, you can ensure that your wheels are securely fastened. Remember to periodically check the lug nut torque to maintain the integrity of your vehicle’s wheels and tires.
