2017 Silverado Lug Nut Torque: Proper Torque Specifications for Safe Wheel Installation
When it comes to maintaining your vehicle’s safety and performance, proper wheel installation is crucial. One important aspect of wheel installation is ensuring that the lug nuts are torqued to the manufacturer’s specifications. In the case of the 2017 Silverado, following the recommended torque values is essential to prevent wheel loosening or damage. This article will provide you with the necessary information on the lug nut torque specifications for the 2017 Silverado, ensuring a safe and secure driving experience.
Torque Specifications for Lug Nuts on the 2017 Silverado
Before diving into the specific torque values, it’s important to understand what torque is and why it matters. Torque refers to the amount of force applied to tighten a fastener, in this case, the lug nuts. It is measured in pound-feet (lb. ft) or Newton-meters (Nm). Properly torquing the lug nuts ensures that they are tightened to the appropriate level, preventing over-tightening or under-tightening, both of which can lead to problems.
The following table provides the lug nut torque specifications for the 2017 Silverado:
| Wheel Size | Torque Specifications (lb. ft/Nm) |
|---|---|
| 16-inch | 140 lb. ft / 190 Nm |
| 17-inch | 140 lb. ft / 190 Nm |
| 18-inch | 140 lb. ft / 190 Nm |
| 20-inch | 140 lb. ft / 190 Nm |
| 22-inch | 140 lb. ft / 190 Nm |
Steps to Properly Torque Lug Nuts on the 2017 Silverado
Now that you have the torque specifications, here are the steps to correctly torque the lug nuts on your 2017 Silverado:
- Ensure that you have a torque wrench capable of measuring the required torque values.
- Before lifting the vehicle, loosen the lug nuts using a lug wrench or impact wrench.
- Using a jack, lift the vehicle off the ground until the wheel is fully suspended.
- Remove the loosened lug nuts and the wheel.
- Clean the wheel hub and the mounting surface to ensure a proper fit.
- Place the wheel onto the hub and hand-tighten the lug nuts until they are snug.
- Using the torque wrench, tighten the lug nuts in a star pattern. Start with a lower torque setting and gradually increase it until you reach the specified torque value.
- Double-check the lug nuts to ensure they are all properly torqued.
- Lower the vehicle and use the torque wrench to recheck the lug nuts’ torque after the wheels are back on the ground.
Following these steps will help you ensure that the lug nuts on your 2017 Silverado are torqued to the manufacturer’s specifications, promoting safe and secure wheel installation. Remember to always consult your vehicle’s owner’s manual for specific instructions and torque values, as they may vary depending on the model and trim level.
By taking the time to properly torque your lug nuts, you are investing in the safety and longevity of your vehicle’s wheels. Don’t overlook this critical step and enjoy a smooth and worry-free driving experience in your 2017 Silverado.
