Lug Nut Torque for Subaru Outback
Introduction
When it comes to maintaining your Subaru Outback, one crucial aspect is ensuring that the lug nuts on your wheels are properly torqued. This not only ensures the safety of your vehicle but also prevents any potential damage to the wheels or other components. In this article, we will discuss the recommended lug nut torque specifications for Subaru Outback and provide a handy table for easy reference.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your Subaru Outback’s lug nuts, it is essential to follow the manufacturer’s recommendations. The following table provides the lug nut torque specifications in both lb. ft (pound-feet) and Nm (Newton-meters):
| Lug Nut Size | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| 12mm | 70-80 | 95-110 |
| 14mm | 85-95 | 115-130 |
| 16mm | 95-110 | 130-150 |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts on your Subaru Outback are torqued correctly, follow these steps:
1. Gather the necessary tools: You will need a torque wrench, the appropriate socket size for your lug nuts, and a breaker bar if necessary.
2. Loosen the lug nuts: Before lifting your vehicle, use the breaker bar or a lug wrench to slightly loosen the lug nuts. This will make it easier to remove them once the vehicle is lifted.
3. Lift the vehicle: Use a jack to lift your Subaru Outback off the ground, ensuring it is secure on jack stands.
4. Remove the lug nuts: Completely remove the lug nuts using the appropriate socket size.
5. Clean the wheel studs: Inspect the wheel studs for any dirt or debris. Clean them thoroughly to ensure a proper connection.
6. Install the wheel: Place the wheel onto the wheel studs and hand-tighten the lug nuts.
7. Torque the lug nuts: Using a torque wrench, apply the recommended torque specified in the table above for your specific lug nut size. Start with a lower torque setting and gradually increase until the desired torque is reached.
8. Double-check the torque: After torquing all the lug nuts, go back and double-check each one to ensure they are all properly tightened.
9. Lower the vehicle: Carefully lower your Subaru Outback back to the ground using the jack.
10. Final check: Once the vehicle is on the ground, give each lug nut a final check to ensure they are still properly torqued.
Conclusion
Properly torquing the lug nuts on your Subaru Outback is crucial for both safety and maintaining the integrity of your vehicle. By following the manufacturer’s recommended torque specifications and using a torque wrench, you can ensure that your wheels are securely fastened. Remember to always double-check your work and periodically inspect the lug nuts for any signs of loosening.
