2013 Ram 2500 Lug Nut Torque Specifications
When it comes to maintaining your vehicle, one important aspect to consider is the proper torque specifications for your lug nuts. The lug nuts on your 2013 Ram 2500 play a crucial role in keeping your wheels securely attached to the vehicle, ensuring your safety on the road. In this article, we will provide you with the recommended lug nut torque specifications for your Ram 2500.
Torque Specifications
Below is a table outlining the lug nut torque specifications for the 2013 Ram 2500:
| Lug Nut Size | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| 9/16″ | 130-140 | 176-190 |
| 14mm | 130-140 | 176-190 |
| 1/2″ | 100-110 | 136-149 |
Steps to Properly Torque Lug Nuts
Now that you have the torque specifications for your Ram 2500’s lug nuts, here are the steps to properly torque them:
- Start by ensuring that your vehicle is on a level surface and the parking brake is engaged.
- Using a lug wrench or an impact wrench, loosen each lug nut on the wheel you intend to work on. Do not remove them completely at this stage.
- Once the lug nuts are loosened, use a jack to lift the vehicle off the ground, ensuring that it is secure on jack stands.
- Remove the loosened lug nuts and take off the wheel.
- Inspect the wheel studs and lug nuts for any damage or wear. Replace any damaged components before reinstallation.
- Place the wheel back onto the vehicle’s hub, aligning the lug nut holes with the wheel studs.
- Hand-tighten each lug nut until they are snug against the wheel.
- Using a torque wrench, tighten each lug nut according to the specified torque value for your particular lug nut size. Start with the lug nut closest to the 12 o’clock position and work your way around in a star pattern.
- Once all lug nuts are properly torqued, double-check the torque on each nut to ensure accuracy.
- Lower the vehicle back to the ground using the jack and remove the jack stands.
- Finally, using a torque wrench, recheck the lug nut torque after driving approximately 50-100 miles to ensure they have not loosened.
Following these steps and adhering to the recommended torque specifications will help maintain the integrity of your lug nuts and ensure the safe operation of your 2013 Ram 2500.
