2013 Subaru Outback Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. This is particularly important for the safety and performance of your Subaru Outback. In this article, we will discuss the recommended lug nut torque specifications for the 2013 Subaru Outback, providing you with the necessary information to keep your wheels secure.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your lug nuts, it is essential to follow the manufacturer’s recommendations. The table below outlines the lug nut torque specifications for the 2013 Subaru Outback in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut Type | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| Steel Wheel | 80-90 lb. ft | 108-122 Nm |
| Alloy Wheel | 72-87 lb. ft | 98-118 Nm |
Steps to Properly Torque Lug Nuts
Now that you know the recommended torque specifications, let’s go through the steps to properly torque the lug nuts on your 2013 Subaru Outback:
- Ensure you have a torque wrench capable of measuring in pound-feet (lb. ft) or Newton meters (Nm).
- Before lifting the vehicle, loosen the lug nuts slightly using a lug wrench or breaker bar.
- Use a jack to lift the vehicle off the ground, ensuring it is secure on jack stands.
- Completely remove the loosened lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface of the brake rotor to remove any dirt or debris.
- Place the wheel back onto the wheel hub, aligning the lug nut holes with the studs.
- Hand-tighten the lug nuts in a star or crisscross pattern to ensure even tightening.
- Using the torque wrench, tighten the lug nuts to the specified torque in the table above.
- Double-check the torque on each lug nut to ensure they are all properly tightened.
- Lower the vehicle from the jack stands and remove the jack.
- Finally, recheck the lug nut torque after driving a short distance to confirm they remain properly tightened.
Conclusion
Maintaining the correct lug nut torque on your 2013 Subaru Outback is crucial for your safety and the longevity of your vehicle. By following the recommended torque specifications and properly torquing your lug nuts, you can ensure that your wheels are securely fastened. Remember to always consult your vehicle’s owner’s manual for specific torque recommendations and follow the proper steps to achieve the desired torque.
