2015 Ford Escape Lug Nut Torque
Introduction
The lug nut torque specification for a 2015 Ford Escape is an important factor to consider when performing maintenance or replacing the wheels on your vehicle. Properly torquing the lug nuts ensures the wheels are securely fastened to the vehicle, preventing accidents and ensuring a smooth and safe ride.
Lug Nut Torque Specifications
To ensure the correct torque is applied to the lug nuts, it is essential to refer to the manufacturer’s specifications. In the case of the 2015 Ford Escape, the lug nut torque specification is as follows:
| Lug Nut Size | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| 12mm x 1.5 | 100-110 | 136-149 |
| 14mm x 1.5 | 85-95 | 115-129 |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are torqued correctly, follow these steps:
- Ensure you have the correct torque wrench for the job. A torque wrench is a specialized tool that allows you to apply a specific amount of torque to a fastener.
- Before starting, make sure the vehicle is on a level surface and the parking brake is engaged.
- Loosen the lug nuts on the wheel you are working on, but do not remove them completely.
- Using a jack, lift the vehicle until the wheel you are working on is off the ground. Place jack stands under the vehicle to ensure stability.
- Remove the lug nuts and the wheel.
- Clean the wheel hub and the mounting surface on the brake rotor or drum to remove any dirt or debris.
- Place the wheel onto the hub, aligning the lug nut holes.
- Hand-tighten the lug nuts in a star pattern, ensuring they are evenly tightened.
- Using the torque wrench, tighten the lug nuts to the specified torque in a star pattern as well. Start with a lower torque setting and gradually increase it until the desired torque is reached.
- Double-check the lug nuts to ensure they are all properly torqued.
- Lower the vehicle from the jack stands and remove the jack.
- Finally, recheck the lug nuts after driving a short distance to confirm they are still properly torqued.
Conclusion
Properly torquing the lug nuts on your 2015 Ford Escape is crucial for the safety and performance of your vehicle. By following the manufacturer’s specifications and using the correct torque wrench, you can ensure that your wheels are securely fastened, providing a safe and comfortable driving experience.
