2018 Subaru Impreza Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one important aspect to consider is the proper torque specification for your lug nuts. This ensures that your wheels are securely fastened, providing safety and preventing any potential issues while driving. In this article, we will discuss the recommended lug nut torque for the 2018 Subaru Impreza.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your Subaru Impreza’s lug nuts, it is essential to refer to the manufacturer’s specifications. The following table provides the recommended torque values in both pound-feet (lb. ft) and Newton meters (Nm) for the 2018 Subaru Impreza:
| Lug Nut Position | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| Front | 88-108 lb. ft | 120-147 Nm |
| Rear | 66-79 lb. ft | 90-108 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts on your Subaru Impreza are properly torqued, follow these steps:
- Start by parking your vehicle on a flat surface and engaging the parking brake.
- Using a lug wrench or a suitable socket and torque wrench, loosen each lug nut on the wheel you intend to work on, but do not remove them completely.
- Once the lug nuts are loosened, use a jack to lift the vehicle until the wheel is off the ground. Make sure to place jack stands under the vehicle for added safety.
- Remove the lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to ensure proper contact.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a star or crisscross pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts to the recommended torque specification according to the table provided above.
- After torquing the lug nuts, double-check each nut to ensure they are properly tightened.
- Repeat the process for each wheel, following the same torque specifications.
- Lower the vehicle from the jack stands and remove the jack.
- Finally, recheck the lug nuts after driving a short distance to confirm they remain properly tightened.
Conclusion
Properly torquing the lug nuts on your 2018 Subaru Impreza is crucial for your safety and the longevity of your vehicle. By following the manufacturer’s torque specifications and using the correct torque wrench, you can ensure that your wheels are securely fastened. Remember to always double-check your lug nuts periodically to maintain their proper torque.
