2019 Ram 3500 Lug Nut Torque: A Comprehensive Guide
Introduction
When it comes to maintaining your vehicle, ensuring that the lug nuts are properly torqued is crucial for your safety and the longevity of your vehicle. In this article, we will provide you with the recommended lug nut torque specifications for the 2019 Ram 3500, allowing you to confidently perform this essential maintenance task.
Understanding Lug Nut Torque
Lug nut torque refers to the amount of force applied to tighten the lug nuts on your vehicle’s wheels. It is essential to tighten them to the manufacturer’s specifications to prevent them from becoming loose while driving, which can lead to accidents or damage to your vehicle.
Recommended Lug Nut Torque Specifications for the 2019 Ram 3500
To ensure that your lug nuts are properly torqued, refer to the table below for the recommended torque specifications in pound-feet (lb. ft) and Newton-meters (Nm):
| Lug Nut Position | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| Front and Rear Wheels | 130 lb. ft | 176 Nm |
Steps to Properly Torque the Lug Nuts
To ensure that you torque the lug nuts correctly, follow these steps:
- Start by parking your Ram 3500 on a flat surface and engaging the parking brake.
- Using a lug wrench or a torque wrench, loosen each lug nut by turning them counterclockwise.
- Once all the lug nuts are loose, use a torque wrench set to the recommended torque specification (130 lb. ft or 176 Nm) to tighten each lug nut in a star pattern.
- Continue tightening each lug nut until you have torqued all of them to the specified torque.
- After torquing all the lug nuts, double-check each one to ensure they are properly tightened.
Conclusion
Properly torquing the lug nuts on your 2019 Ram 3500 is essential for your safety and the longevity of your vehicle. By following the recommended torque specifications provided in this article and using the correct torque wrench, you can ensure that your lug nuts are tightened to the appropriate level. Remember to always consult your vehicle’s owner’s manual for any specific torque specifications or guidelines.
James, I have a 2019 Dodge 3500 Promaster that is actually a Class B RV.
I replaced the tires in early May, 2024.
About 2500 miles later it was pointed out to me 2 lug bolts were missing, one on each rear wheel. Tires were replaced in Florida. I’m on an extended trip to Michigan where I was informed of missing nuts. Tire manager in Florida said to take care of it & he will take care of me when I return to Fl.
Tire store in Michigan ordered two nuts but when going to install them, found the threads to be stripped. They tried to repair but failed & says I need two new hubs. Cost to be about $1200.00 plus the two nuts & labor of trying to make them work.
Now Florida manager wants me to drive back to Florida and he will take care of it. Is it safe to drive another 2000 + miles with one missing nut on each rear wheel?