2019 Subaru Impreza Lug Nut Torque
When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. The lug nuts play a vital role in keeping your wheels securely attached to your Subaru Impreza, ensuring your safety on the road. In this article, we will discuss the recommended lug nut torque specifications for the 2019 Subaru Impreza.
Understanding Lug Nut Torque
Lug nut torque refers to the amount of force applied to tighten the lug nuts on your vehicle’s wheels. It is essential to tighten them to the correct torque specification to prevent issues such as loose wheels, uneven wear on the tires, or even wheel detachment. Over-tightening or under-tightening the lug nuts can lead to severe consequences, including accidents.
2019 Subaru Impreza Lug Nut Torque Specifications
For the 2019 Subaru Impreza, the lug nut torque specifications are as follows:
| Lug Nut Size | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| 12mm x 1.25 | 70-80 | 95-108 |
| 12mm x 1.50 | 70-80 | 95-108 |
| 14mm x 1.25 | 85-95 | 115-129 |
It is important to note that these torque specifications are general guidelines. Always refer to your vehicle’s owner’s manual or consult a professional mechanic to ensure the correct torque values for your specific Subaru Impreza model and year.
Proper Lug Nut Torque Procedure
Here is a step-by-step guide on how to properly torque the lug nuts on your 2019 Subaru Impreza:
- Ensure that your vehicle is parked on a level surface and the parking brake is engaged.
- Using a lug wrench or a torque wrench, loosen the lug nuts on each wheel before lifting the vehicle.
- Using a jack, lift the vehicle until the wheels are off the ground. Place jack stands under the vehicle for added safety.
- Remove the lug nuts completely and take off the wheels.
- Clean the wheel studs and the mounting surface to remove any dirt or debris.
- Place the wheel back onto the wheel studs and hand-tighten the lug nuts until they are snug.
- Using a torque wrench, tighten the lug nuts in a star or cross pattern. Gradually increase the torque until you reach the recommended specification.
- Repeat the process for all the wheels.
- Lower the vehicle and remove the jack stands.
- Finally, double-check the lug nuts’ torque after lowering the vehicle to ensure they are properly tightened.
By following these steps and adhering to the recommended torque specifications, you can ensure the lug nuts on your 2019 Subaru Impreza are properly tightened, promoting your safety and the longevity of your vehicle.
Remember, if you are unsure or uncomfortable performing this task yourself, it is always best to consult a professional mechanic for assistance.
