2008 Subaru Outback Lug Nut Torque
Introduction
When it comes to maintaining your vehicle, one important aspect to consider is the proper torque specification for lug nuts. This ensures the wheels are securely fastened and prevents any potential accidents or damage. In this article, we will discuss the recommended lug nut torque specifications for a 2008 Subaru Outback.
Lug Nut Torque Specifications
To ensure the correct torque is applied to the lug nuts, it is essential to refer to the manufacturer’s specifications. The table below provides the recommended torque values for the lug nuts on a 2008 Subaru Outback:
Lug Nut Position | Torque (lb. ft) | Torque (Nm) |
---|---|---|
Front and Rear Wheels | 80-94 lb. ft | 108-128 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are tightened correctly, follow these steps:
- Start by parking your Subaru Outback on a level surface and engage the parking brake.
- Using a lug wrench or a suitable socket and torque wrench, loosen each lug nut on the wheel you intend to work on, but do not remove them completely.
- Position the jack under the appropriate jacking point and lift the vehicle until the wheel is off the ground.
- Remove the loosened lug nuts and take off the wheel.
- Clean the hub surface and the wheel mating surface to ensure proper contact.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a star or crisscross pattern to ensure even tightening.
- Using a torque wrench, set it to the recommended torque value specified in the table above.
- Tighten each lug nut in the same star or crisscross pattern until the specified torque is reached.
- Double-check the lug nuts to ensure they are all properly torqued.
- Repeat the process for each wheel.
Conclusion
Properly torquing the lug nuts on your 2008 Subaru Outback is crucial for your safety and the longevity of your vehicle. By following the manufacturer’s recommended torque specifications and using the correct torque wrench, you can ensure that your wheels are securely fastened. Remember to always refer to the owner’s manual or consult a professional if you have any doubts or questions regarding lug nut torque.