2013 Kia Soul Lug Nut Torque Specifications
Introduction
When it comes to maintaining your vehicle, it is essential to pay attention to even the smallest details. One such detail is the torque specifications for your Kia Soul’s lug nuts. Properly torquing the lug nuts ensures that your wheels are securely fastened to your vehicle, preventing any potential accidents or damage. In this article, we will provide you with the recommended lug nut torque specifications for the 2013 Kia Soul.
Lug Nut Torque Specifications
To ensure the correct torque is applied to your Kia Soul’s lug nuts, refer to the following table for the torque specifications in both pound-feet (lb. ft) and Newton meters (Nm):
| Lug Nut | Torque (lb. ft) | Torque (Nm) |
|---|---|---|
| Front and Rear Lug Nuts | 80-94 lb. ft | 108-128 Nm |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts are torqued correctly, follow these steps:
- Using a lug wrench or socket wrench, loosen each lug nut on the wheel by turning counterclockwise. Do not fully remove the lug nuts at this point.
- Position a jack under the appropriate jacking point of your Kia Soul and raise the vehicle until the wheel is off the ground.
- Completely remove the lug nuts and carefully take off the wheel.
- Clean the wheel hub and the mounting surface of the brake rotor or drum to remove any dirt or debris.
- Place the wheel back onto the hub, aligning the holes with the lug studs.
- Hand-tighten the lug nuts in a star pattern to ensure even tightening.
- Using a torque wrench, tighten each lug nut to the specified torque value according to the table above.
- Double-check the tightness of each lug nut to ensure they are properly secured.
- Lower the vehicle back to the ground using the jack.
- Using the lug wrench or socket wrench, give each lug nut a final tightening in a star pattern.
Conclusion
Properly torquing the lug nuts on your 2013 Kia Soul is crucial for the safety and longevity of your vehicle. By following the recommended torque specifications and the steps outlined in this article, you can ensure that your wheels are securely fastened. Remember to always refer to your vehicle’s owner’s manual for specific instructions and torque values, as they may vary depending on the model year or specific trim level of your Kia Soul.
