2017 Kia Sorento Lug Nut Torque Specifications
Introduction
The Kia Sorento is a popular mid-size SUV known for its reliability, comfort, and performance. When it comes to maintaining your vehicle, one crucial aspect is ensuring that the lug nuts are properly torqued. This article will provide you with the recommended lug nut torque specifications for the 2017 Kia Sorento.
Lug Nut Torque Specifications
To ensure the safety and integrity of your vehicle’s wheels, it is essential to tighten the lug nuts to the manufacturer’s recommended torque specifications. The table below lists the lug nut torque specifications for the 2017 Kia Sorento in both lb. ft (pound-feet) and Nm (Newton meters):
| Lug Nut Position | Torque Specification (lb. ft) | Torque Specification (Nm) |
|---|---|---|
| Front and Rear Wheel Lug Nuts | 80-94 lb. ft | 108-128 Nm |
| Spare Wheel Lug Nuts | 80-94 lb. ft | 108-128 Nm |
Steps to Properly Torque Lug Nuts
To ensure that the lug nuts are properly torqued, follow these steps:
1. Start by parking your Kia Sorento on a flat and level surface.
2. Loosen the lug nuts on the wheel you intend to work on, but do not remove them completely.
3. Use a jack to lift the vehicle until the wheel you are working on is off the ground.
4. Completely remove the loosened lug nuts and take off the wheel.
5. Clean the wheel hub and the mounting surface to remove any dirt or debris.
6. Place the wheel back onto the hub, aligning the lug nut holes.
7. Hand-tighten the lug nuts in a star or crisscross pattern to ensure even tightening.
8. Use a torque wrench to tighten the lug nuts to the specified torque value listed in the table above.
9. Repeat the process for each wheel, ensuring that the lug nuts are torqued correctly.
Importance of Proper Lug Nut Torque
Properly torqued lug nuts are crucial for several reasons. Insufficient torque may cause the lug nuts to loosen over time, leading to wheel vibrations, uneven tire wear, and potential wheel detachment. On the other hand, excessive torque can damage the wheel studs or the lug nuts themselves, making them difficult to remove in the future.
Conclusion
Maintaining the correct lug nut torque on your 2017 Kia Sorento is essential for the safety and performance of your vehicle. By following the recommended torque specifications and using a torque wrench, you can ensure that your lug nuts are tightened to the appropriate level. Regularly checking and maintaining the lug nut torque will help prevent any potential issues and keep your Kia Sorento running smoothly on the road.
