Tesla Model S Lug Nut Torque: A Guide to Proper Tightening
Introduction
When it comes to maintaining your Tesla Model S, one crucial aspect is ensuring that the lug nuts on your wheels are properly tightened. This article will provide you with the necessary information on the recommended lug nut torque specifications for your Tesla Model S, ensuring safety and optimal performance.
Lug Nut Torque Specifications
To prevent any potential issues like loose wheels or damaged studs, it is essential to follow the recommended lug nut torque specifications provided by Tesla. The table below outlines the torque specifications in both pound-feet (lb. ft) and Newton meters (Nm) for different Tesla Model S variants:
| Tesla Model S Variant | Lug Nut Torque (lb. ft) | Lug Nut Torque (Nm) |
|---|---|---|
| Model S 60 | 129 | 175 |
| Model S 75 | 129 | 175 |
| Model S 85 | 129 | 175 |
| Model S 90 | 129 | 175 |
| Model S P85 | 129 | 175 |
| Model S P90 | 129 | 175 |
| Model S P100D | 129 | 175 |
Proper Lug Nut Torque Procedure
To ensure that you tighten the lug nuts correctly, follow these steps:
- Start by using a torque wrench with the appropriate socket size for your Tesla Model S lug nuts.
- Before lifting the vehicle, make sure it is parked on a flat surface and engage the parking brake.
- Loosen the lug nuts on each wheel using a lug wrench or a breaker bar.
- Using a jack, lift the vehicle until the wheel is off the ground. Place jack stands under the vehicle for added safety.
- Remove the lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to ensure a proper fit.
- Place the wheel back onto the hub and hand-tighten the lug nuts until they are snug.
- Using the torque wrench, tighten the lug nuts in a star pattern gradually. Refer to the torque specifications table for the appropriate torque value.
- Double-check that all lug nuts are properly tightened.
- Lower the vehicle and remove the jack stands.
- Finally, recheck the lug nuts’ tightness after driving a short distance to confirm they remain properly torqued.
Conclusion
Maintaining the correct lug nut torque on your Tesla Model S is crucial for safety and optimal performance. By following the recommended torque specifications and the proper tightening procedure outlined in this article, you can ensure that your wheels are securely fastened. Remember to always consult your Tesla owner’s manual or contact a certified Tesla service center if you have any specific concerns or questions regarding lug nut torque.
